Schedule a dedicated 30-minute live remote session via RustDesk. Our tuner connects directly to your ECU to calibrate cold start, idle stability, and smooth neutral acceleration so you can safely verify mechanical readiness.
1
Network TestPuerto Rico Ping
2
Mechanical CheckVehicle Readiness
3
ECU & SoftwareTunerStudio Online
📅
Schedule BookingPick Date & Time
1
Part 1: Remote Connection & Latency Check
We test your live round-trip latency to our server in Puerto Rico to ensure smooth real-time datalogging and RustDesk screen sharing.
📡
Puerto Rico Ping-- msOrigin Server: San Juan, PR
📊
Connection Jitter-- msStability variance
⏳
Connection QualityReady to TestTarget: Ping ≤ 300ms, Jitter ≤ 100ms
💡Using a 4G/5G Phone Hotspot at the Car?
Phone Placement: Keep your phone on the car roof or windshield—metal cabins/hoods can reduce cellular signal.
USB Tethering: For lowest latency and zero drops, plug your phone into the laptop via USB cable and enable USB Tethering.
Hotspot Cap: Ensure your cellular carrier hasn't throttled your hotspot data to 2G/3G speeds.
Prefer testing manually? Open Speedtest.net, click Change Server, and select any San Juan / Puerto Rico server (Liberty, Claro, Prepa).
2
Part 2: Mechanical Pre-Flight & Vehicle Setup
Select your vehicle setup to complete the required hardware and safety inspection checklist.
Note: Vehicles in the OEM/Light class should typically be operational on the stock ECU before remote tuning. Is your vehicle NOT running on the stock ECU due to one of the following reasons?
Bypassing a factory immobilizer or anti-theft security lockout
The factory stock ECU was damaged or defective
⛔ Action Required: The vehicle must be capable of running on the factory stock ECU before starting remote tuning. If your car has major aftermarket engine modifications, please switch to Option B: Modified Setup above.
We permit benign exhaust, wideband sensor swaps, or intake correlation trouble codes. Please select the status of your active fault codes:
⚠️ Action Required: Remote tuning cannot fix underlying mechanical misfires, broken cam/crank sensors, or electrical shorts. Please scan, diagnose, and resolve non-whitelist trouble codes before booking your session.
By checking all items and submitting, you certify that all mechanical, cooling, exhaust, fuel, and electrical checks have been physically inspected and verified on the vehicle. If the remote session cannot proceed or is aborted due to preventable mechanical failure, boost/coolant/fuel leaks, non-resistor plugs, or unverified hardware, you will be held liable for lost tuner time and no refund will be issued for the scheduled slot.
3
Part 3: ECU & Software Readiness
Ensure your laptop is ready with the required software and can communicate with your ECU before booking.
Prerequisites Verified! Select Your ECU Platform & Booking Slot Below.
1
Select Your ECU Platform
Pricing varies based on ECU platform complexity and protocol calibration requirements.
2
Select Date & Time Slot
Choose an available session. Picking a slot temporarily locks it for 20 minutes for you.
August 2026
SunMonTueWedThuFriSat
Available Selected Booked / Held
Select a Day
Timezone: AST / EDT
👈 Click any available day on the calendar to view open 30-minute time slots.
3
Vehicle Details & Checkout
Enter your setup details so our tuner can prepare your initial base maps prior to the call.
ℹ️
Session Rules: Customer must have a charged laptop with RustDesk installed and stable Wi-Fi/Hotspot at the vehicle. Vehicle must be mechanically sound and in neutral.
Booking Summary
Service:Base Tune – Remote Real-Time
ECU Platform:AlphaECU Platform
Scheduled Date:—
Time Slot:—
Duration:30 Minutes (Live via RustDesk)
Total Due Today:$150.00 USD
Lock expires in: 20:00
Payment is processed securely via Shopify Checkout.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.